|
Publications
Below is a list of journal publications in the past
several
years. For a complete list of Dr. Papautsky’s 120+ peer-reviewed
journal and conference publications, please
click here to download
his vita.
2010
- M. Dhindsa, J. Heikenfeld, S. Kwon, J.
Park, P. D. Rack, I. Papautsky, “Virtual electrowetting channels:
electronic liquid transport with continuous channel functionality,”
Lab Chip, 2010, DOI: 10.1039/b925278a. [pdf]
- A. A. S. Bhagat, S. S. Kuntaegowdanahalli, and I.
Papautsky, “Inertial microfluidics for sheath-less
high-throughput flow cytometry,” Biomed. Microdev.,
2010, DOI 10.1007/s10544-009-9374-9. [pdf]
- K. A Comandur, A. A. S. Bhagat, S. Dasgupta,
I. Papautsky, and R. K. Banerjee, “Transport and reaction of
nano-liter samples in a microfluidic reactor using electroosmotic
flow,” J. Micromech. Microeng., March, 2010.
- A. Banerjee, Y. Shuai, R. Dixit, I.
Papautsky, and D. Klotzkin, “Concentration dependence of
fluorescence signal in a microfluidic fluorescence detector,” J.
Luminance, accepted Jan. 2010.
2009
- S. S. Kuntaegowdanahalli, A. A. S. Bhagat, and I. Papautsky, “Inertial
microfluidics for continuous particle separation in spiral
microchannels,” Lab Chip, vol. 9, pp. 2973–2980, 2009. [pdf]
- T.-S. Lim, J.-H. Lee, I. Papautsky, “Effects
of Recess Dimensions on Performance of the Recessed Cathode
Dissolved Oxygen Sensor,” Sensors Actuators B, 2009,
vol. 141, pp. 50-57, 2009. [pdf]
- A. A. S. Bhagat, S. S. Kuntaegowdanahalli, and I.
Papautsky, “Geometrically modulated inertial microfluidics for
continuous particle filtration and extraction,” Microfluid.
Nanofluid., vol. 7, pp. 217-226, 2009. [pdf]
- W. H. Lee, J.-H. Lee, P. L. Bishop, I.
Papautsky, “Biological Application of MEMS Microelectrode Array
Sensors for Direct Measurement of Phosphate in the Enhanced
Biological Phosphorous Removal Process,” Water Environ. Res.,
vol. 81, pp. 678-685, 2009.
- P. Jothimuthu, A. A. S. Bhagat, A. Carroll, G.
Lin, J. Mack, and I. Papautsky, “Photodefinable PDMS thin films for
microfabrication applications,” J. Micromech. Microeng.,
vol. 19, 045024, 2009. [pdf]
- J.-H. Lee, W. H. Lee, P. L. Bishop, I.
Papautsky, “Cobalt Coated Needle-type Microelectrode Array Sensor
for In Situ Monitoring of Phosphate,” J. Micromech. Microeng.,
vol. 19, 025022, 2009. [pdf]
2008
- A. A. S. Bhagat, S. S. Kuntaegowdanahalli, and I.
Papautsky, “Continuous particle separation in spiral microchannels
using Dean flows and differential migration,” Lab Chip, vol.
8, pp. 1906-1914, 2008. [pdf]
- A. A. S. Bhagat, S. Kuntaegowdanahalli, and I.
Papautsky, “Enhanced particle filtration in straight microchannels
using shear-modulated inertial migration,” Physics of Fluids,
vol. 20, 101702, 2008. [pdf]
- A. A. S. Bhagat, and I. Papautsky, “Enhancing
particle dispersion in a passive planar micromixer using rectangular
obstacles,” J. Micromech. Microeng., vol. 18, 085005, 2008. [pdf]
- S. Dasgupta, A. A. S. Bhagat, M. Horner, I.
Papautsky, and R. K. Banerjee, “Effects of applied electric field
and microchannel wetted perimeter on electroosmotic velocity,”
Microfluid. Nanofluid., vol. 5, pp. 185-192, 2008. [pdf]
- A. Pais, A. Banerjee, D. Klotzkin, and I.
Papautsky, “High-sensitivity, disposable lab-on-a-chip with
thin-film organic electronics for fluorescence detection,” Lab
Chip, vol. 8, pp. 794-800, 2008. [pdf]
- A. Banerjee, A. Pais, I. Papautsky, and D.
Klotzkin, “A polarization isolation method for high-sensitivity, low
cost on-chip fluorescence detection for microfluidic lab-on-a-chip,”
IEEE Sensors Journal, vol. 8, no. 5, pp. 621-627,
2008. [pdf]
- I. Papautsky and E. T. K. Peterson, “An
introductory course to biomedical microsystems for undergraduates,”
Biomed. Microdev., vol. 10, pp. 375-378, 2008. [pdf]
2007
- J.-H. Lee, Y. Seo, T.-S. Lim, P. L. Bishop,
and I. Papautsky, “MEMS needle-type sensor array for in situ
measurements of dissolved oxygen and redox potential,” Environ.
Sci. Technol., vol. 41, no. 22, pp 7857-7863, 2007. [pdf]
- J.-H. Lee, T.-S. Lim, Y. Seo, P. L. Bishop,
and I. Papautsky, “Needle-type dissolved oxygen microelectrode array
sensors for in situ measurements,” Sensors Actuators B,
vol. 128, pp. 179-185, 2007. [pdf]
- A. A. S. Bhagat, P. Jothimuthu, and I. Papautsky,
“Photodefinable polydimethylsiloxane (PDMS) for rapid lab-on-a-chip
prototyping,” Lab Chip, vol. 7, pp. 1192-1197, 2007. [pdf]
- A. A. S. Bhagat, E. T. K. Peterson, and I.
Papautsky, “A passive planar micromixer with obstructions for mixing
at low Reynolds numbers,” J. Micromech. Microeng., vol. 17,
pp. 1017-1024, 2007. [pdf]
- G. Jing, A. Polaczyk, D. Oerther, and I.
Papautsky, “Developing biochip for culture based detection of
environmental mycobacteria,” Sensors Actuators B, vol. 123,
pp. 614-629, 2007. [pdf]
- A. A. S. Bhagat, A. Pais, P. Jothimuthu, and I.
Papautsky, “Re-usable quick-release interconnect for
characterization of microfluidic systems,” J. Micromech. Microeng.,
vol. 17, pp. 42-49, 2007. [pdf]
- D. Klotzkin and I. Papautsky,
“High-sensitivity integrated fluorescence analysis for microfluidic
lab-on-a-chip,” SPIE News, 2007, DOI: 10.1117/2.1200705.0748
[pdf]
2006
- J.-H. Lee, A. Jang, R. R. Myers, P. Bhadri, W.
Timmons, F. R. Beyette, P. L. Bishop, and I. Papautsky, “Fabrication
of microelectrode arrays for sensing of oxidation reduction
potentials,” Sensors Actuators B, vol. 115, no. 1, pp.
220-226, 2006. [pdf]
- A. Polaczyk, B. Kinkle, I. Papautsky, and D.
B. Oerther, “Culture-based MEMS device to track Gordonia in
activated sludge,” Environ. Sci. Technol., vol. 40, no. 7, pp
2269-2274, 2006. [pdf]
2005
- C. Li, F. E. Sauser, R. G. Azizkhan, C. Ahn,
and I. Papautsky, “Polymer flip-chip bonding pressure sensors on
flexible Kapton film for neonatal catheters,” J. Micromech.
Microeng., vol. 15, no. 9, pp. 1729-1735, 2005. [pdf]
- A. Jang, J.-H. Lee, P. R. Bhadri, W. Timmons,
F. R. Beyette, I. Papautsky, and P. L. Bishop, “Miniaturized redox
potential probe for in situ environmental monitoring,”
Environ. Sci. Technol., vol. 39, no. 16, pp. 6191-6197, 2005. [pdf]
- G. Jing, H. B. Eluru, A. Polaczyk, B. Kinkle,
D. B. Oerther, and I. Papautsky, “Paraffin surfaces for
culture-based detection of mycobacteria in environmental samples,”
J. Micromech. Microeng., vol. 15, no. 2, pp. 270-276, 2005. [pdf]
2004
- G. Jing, G. Hollis, A. Polaczyk, H. B. Eluru,
B. Kinkle, D. B. Oerther, and I. Papautsky, “Developing rapid
detection of mycobacteria using microwaves,” Analyst, vol.
129, no. 10, pp. 963-969, 2004. [pdf]
- J. Narasimhan and I. Papautsky, “Polymer
embossing tools for rapid prototyping plastic microfluidic devices,”
J. Micromech. Microeng., vol. 14, no. 1, pp. 96-103, 2004. [pdf]
- P. Srinivasan, F. R. Beyette, and I.
Papautsky, “Micromachined arrays of cantilevered glass probes,”
Applied Optics, vol. 43, no. 4, pp. 776-782, 2004. [pdf]
- I. Nikcevic, A. Bange, E. T. K. Peterson, I.
Papautsky, W. R.Heineman, H. B. Halsall, and C. J. Seliskar,
“Imaging fluorescently labeled microbeads on polymer surfaces using
epifluorescence microscopy,” Sci. Technol. Safety, vol. 2,
pp. 35-40, 2004.
|
|
UC Home 
